Mitsubishi Evo 4-9 4G63 Direct Replacement Exhaust Manifold

SKU: 4G63-EVO4-9-DR-EX

Mitsubishi Evo 4-9 4G63 Direct Replacement Exhaust Manifold

SKU: 4G63-EVO4-9-DR-EX
Regular price $1,250.00
/
  • In stock, ready to ship
  • Inventory on the way

Specifications:

  • Material: SUS347 Stainless Steel Investment Cast Construction

Features:

  • Direct Bolt On Compatibility with Stock Frame Turbochargers
  • Bolt Hole Provisions for OEM / OEM Style Heat Shields

Package Contents:

  • Exhaust Manifold

Notes:

  • Turbo Compatibility: Stock Frame Turbochargers 
  • Designed in Australia with Lifetime Warranty*

At ARTEC we have revolutionised the turbo manifold industry with our industry leading SUS347 stainless steel investment cast manifolds.

All of our manifolds are engineered and designed from the ground up, CFD simulated and, most importantly, tested in the real world to achieve maximum flow and heat dispersion. The cast stainless construction allows us to maximise flow and efficiency by having smooth merging angles and eliminating any restrictions from tight radius bends or runners.

The result is a truly optimised manifold with consistent performance, resistant to heat pooling and cracking, plus a beautiful smooth exterior finish.

Designed and tested in Australia, backed with a lifetime warranty.

--
Our Evo 4-9 Standard Replacement manifold allows you to retain the OEM heat shield as well as using our 33mm runners for a sharp throttle response.

After scanning and extensively testing the factory 4G63 Evolution turbo manifold, our conclusion is that only 3 out of the 4 runners reach the collector and 2 of the runners meet just before the turbo flange area. This exposes the factory item to pre-emptive failure as the extreme heat collects in such a small diameter of pipe with twice the exhaust gases it would normally experience. All this additional heat in this area also causes the metal to expand which gives way to movement and leaves it prone to cracking (a common problem).

All Artec manifolds are guaranteed to fit your engine bay and auxiliaries without headache or fuss and are designed to be installed in approximately 10 minutes. The bolt locations are easily accessible as the cast was designed around them for ease of installation and accessibility. Artec stainless manifolds are the unrivalled in their simplicity and efficiency!

Specifications:

  • Material: SUS347 Stainless Steel Investment Cast Construction

Features:

  • Direct Bolt On Compatibility with Stock Frame Turbochargers
  • Bolt Hole Provisions for OEM / OEM Style Heat Shields

Package Contents:

  • Exhaust Manifold

Notes:

  • Turbo Compatibility: Stock Frame Turbochargers 
  • Designed in Australia with Lifetime Warranty*

At ARTEC we have revolutionised the turbo manifold industry with our industry leading SUS347 stainless steel investment cast manifolds.

All of our manifolds are engineered and designed from the ground up, CFD simulated and, most importantly, tested in the real world to achieve maximum flow and heat dispersion. The cast stainless construction allows us to maximise flow and efficiency by having smooth merging angles and eliminating any restrictions from tight radius bends or runners.

The result is a truly optimised manifold with consistent performance, resistant to heat pooling and cracking, plus a beautiful smooth exterior finish.

Designed and tested in Australia, backed with a lifetime warranty.

--
Our Evo 4-9 Standard Replacement manifold allows you to retain the OEM heat shield as well as using our 33mm runners for a sharp throttle response.

After scanning and extensively testing the factory 4G63 Evolution turbo manifold, our conclusion is that only 3 out of the 4 runners reach the collector and 2 of the runners meet just before the turbo flange area. This exposes the factory item to pre-emptive failure as the extreme heat collects in such a small diameter of pipe with twice the exhaust gases it would normally experience. All this additional heat in this area also causes the metal to expand which gives way to movement and leaves it prone to cracking (a common problem).

All Artec manifolds are guaranteed to fit your engine bay and auxiliaries without headache or fuss and are designed to be installed in approximately 10 minutes. The bolt locations are easily accessible as the cast was designed around them for ease of installation and accessibility. Artec stainless manifolds are the unrivalled in their simplicity and efficiency!

Evolution Racing Spares aims to have fast turnaround time for processing and handling orders, and will always make every effort to get the order to you as soon as possible.

Small items: 1-3 Days via Express Post Satchel
Medium Sized Items: 2-3 working days via AusPost Express or Courier (Depending on location)

Large Items: 2-8 working days (Large items can only be sent via courier, and delivery time depends on both courier and location

- Delivery to rural or remote areas, NT, WA, and TAS may take longer.

- Express Post shipping is only valid to areas that fall within the express post zone and is not guaranteed.

- Evolution Racing Spares may use the quickest carrier/method for delivery regardless of the method chosen at checkout.

- Typical handling time for items that are in stock is approximately 24-48 hours, with delays during holiday periods and public holidays.

- Evolution Racing Spares is not responsible for lost or damaged orders when customers change the delivery instructions to "authority to leave."

All goods sold and work performed by Evolution Racing Spares come with a 3-month warranty with no questions asked.

In accordance with the Australian Consumer Law, we are not required to provide a refund or replacement if you change your mind.

You can choose a refund or exchange if an item has a major problem, including:

  • A problem that would have stopped you from buying the item if you had known about it
  • The item is unsafe
  • The item is significantly different from the sample or description
  • The item doesn't do what we said it would, or what you asked for and can't be easily fixed

Alternatively, you can choose to keep the item and we will compensate you for any drop in value.

  • If the problem is not major, we will repair the item within a reasonable time.
  • If the item is not repaired in a reasonable time, you can choose a refund or replacement.

Please keep your proof of purchase such as your receipt.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

More from All New Parts
Mitsubishi Evolution 5 6 CP9A Floor Mats RHD for JDM & ADM Models
Mitsubishi Evolution 5 6 CP9A Floor Mats RHD for JDM & ADM Models
Mitsubishi Evolution 5 6 CP9A Floor Mats RHD for JDM & ADM Models
$330.00
Mitsubishi Evolution 7 8 9 MR CT9A Floor Mats RHD for JDM & ADM Models
Mitsubishi Evolution 7 8 9 MR CT9A Floor Mats RHD for JDM & ADM Models
Mitsubishi Evolution 7 8 9 MR CT9A Floor Mats RHD for JDM & ADM Models
$330.00
Sold Out
Mitsubishi Evolution 8 to Evolution 9 Headlight Patch Harness (Pair)
Mitsubishi Evolution 8 to Evolution 9 Headlight Patch Harness (Pair)
Mitsubishi Evolution 8 to Evolution 9 Headlight Patch Harness (Pair)
$155.00
Sold Out
Mitsubishi OEM Evo 7 8 9 Drip Moulding RHS Driver (MR520288)
Mitsubishi OEM Evo 7 8 9 Drip Moulding RHS Driver (MR520288)
Mitsubishi OEM Evo 7 8 9 Drip Moulding RHS Driver (MR520288)
$440.00
Mitsubishi Evolution Evo 9 IX Rear Bumper Tow Cover Genuine OEM (6415A011HA)
Mitsubishi Evolution Evo 9 IX Rear Bumper Tow Cover Genuine OEM (6415A011HA)
Mitsubishi Evolution Evo 9 IX Rear Bumper Tow Cover Genuine OEM (6415A011HA)
$80.00
Sold Out
Mitsubishi OEM Evo 7 8 9 Drip Moulding LHS Passenger (MR520287)
Mitsubishi OEM Evo 7 8 9 Drip Moulding LHS Passenger (MR520287)
Mitsubishi OEM Evo 7 8 9 Drip Moulding LHS Passenger (MR520287)
$440.00
Recently viewed