Haltech - Elite 1500 Mitsubishi EVO 4-8 Plug 'n' Play Adaptor Harness Kit

SKU: HT-150945
Haltech - Elite 1500 Mitsubishi EVO 4-8 Plug &

Haltech - Elite 1500 Mitsubishi EVO 4-8 Plug 'n' Play Adaptor Harness Kit

SKU: HT-150945
Regular price $2,800.00
/
  • In stock, ready to ship
  • Inventory on the way
If you are using a factory harness and are after an easy ECU upgrade take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
  • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
  • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
  • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.

Suits: Plug 'n' Play replacement of the factory ECU for Mitsubishi EVO 4-8 (5 Speed)(All Regions) EVO 8 MR (USDM Only) Eclipse 2G Turbo (USDM) Manual transmissions only.

Includes: Elite 1500 ECU with DBW and Race Functions injection molded plastic plug 'n' play adaptor harness M14 x 1.5 air temp sensor with matching plug and pins auxiliary I/O 16 Pin TYCO plug and pins USB programming cable and USB software key.

Notes: E1000 ECU does NOT support the Intercooler Water Spray function on the EVO 7 & 8


ECU OVERVIEW
Elite 1500 is a two-connector stand-alone ECU ideal for popular late model performance and racing applications. Recommended for 4vcylinder Drive-By-Wire (DBW) or 2 rotor engines EFI conversions engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case drive-by-wire throttle control intake and exhaust cam control short-term and long-term map learning dual channel knock control and much more the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide.
  • Supports 1 to 12 cylinder engines
  • 2 rotor engines
  • Normally aspirated or forced induction
  • Load sensing by Throttle Position (TPS) Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF)
  • Staged sequential semi sequential batch or multipoint injection patterns
  • Distributor ignition systems multi-coil systems expand CDI range or Haltech Multiplex CDI systems
  • Connect to a wide range of display dashes and expansion devices via CAN.
  • 4 x fuel injection outputs
  • 4 x ignition outputs
  • 12 x digital outputs
  • 10 x analogue voltage inputs
  • 4 x synchronised pulsed inputs
  • 3 x dedicated inputs (knock ignition switch & onboard MAP Sensor)
  • 2 x dedicated engine position inputs with extensive trigger type support
  • Up to 45 channels of Input & Output (I/O) expansion (via CAN)
  • USB laptop communication (Windows)
  • NSP Calibration Software - intuitive and easy to use
If you are using a factory harness and are after an easy ECU upgrade take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
  • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
  • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
  • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.

Suits: Plug 'n' Play replacement of the factory ECU for Mitsubishi EVO 4-8 (5 Speed)(All Regions) EVO 8 MR (USDM Only) Eclipse 2G Turbo (USDM) Manual transmissions only.

Includes: Elite 1500 ECU with DBW and Race Functions injection molded plastic plug 'n' play adaptor harness M14 x 1.5 air temp sensor with matching plug and pins auxiliary I/O 16 Pin TYCO plug and pins USB programming cable and USB software key.

Notes: E1000 ECU does NOT support the Intercooler Water Spray function on the EVO 7 & 8


ECU OVERVIEW
Elite 1500 is a two-connector stand-alone ECU ideal for popular late model performance and racing applications. Recommended for 4vcylinder Drive-By-Wire (DBW) or 2 rotor engines EFI conversions engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case drive-by-wire throttle control intake and exhaust cam control short-term and long-term map learning dual channel knock control and much more the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide.
  • Supports 1 to 12 cylinder engines
  • 2 rotor engines
  • Normally aspirated or forced induction
  • Load sensing by Throttle Position (TPS) Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF)
  • Staged sequential semi sequential batch or multipoint injection patterns
  • Distributor ignition systems multi-coil systems expand CDI range or Haltech Multiplex CDI systems
  • Connect to a wide range of display dashes and expansion devices via CAN.
  • 4 x fuel injection outputs
  • 4 x ignition outputs
  • 12 x digital outputs
  • 10 x analogue voltage inputs
  • 4 x synchronised pulsed inputs
  • 3 x dedicated inputs (knock ignition switch & onboard MAP Sensor)
  • 2 x dedicated engine position inputs with extensive trigger type support
  • Up to 45 channels of Input & Output (I/O) expansion (via CAN)
  • USB laptop communication (Windows)
  • NSP Calibration Software - intuitive and easy to use

Evolution Racing Spares aims to have fast turnaround time for processing and handling orders, and will always make every effort to get the order to you as soon as possible.

Small items: 1-3 Days via Express Post Satchel
Medium Sized Items: 2-3 working days via AusPost Express or Courier (Depending on location)

Large Items: 2-8 working days (Large items can only be sent via courier, and delivery time depends on both courier and location

- Delivery to rural or remote areas, NT, WA, and TAS may take longer.

- Express Post shipping is only valid to areas that fall within the express post zone and is not guaranteed.

- Evolution Racing Spares may use the quickest carrier/method for delivery regardless of the method chosen at checkout.

- Typical handling time for items that are in stock is approximately 24-48 hours, with delays during holiday periods and public holidays.

- Evolution Racing Spares is not responsible for lost or damaged orders when customers change the delivery instructions to "authority to leave."

All goods sold and work performed by Evolution Racing Spares come with a 3-month warranty with no questions asked.

In accordance with the Australian Consumer Law, we are not required to provide a refund or replacement if you change your mind.

You can choose a refund or exchange if an item has a major problem, including:

  • A problem that would have stopped you from buying the item if you had known about it
  • The item is unsafe
  • The item is significantly different from the sample or description
  • The item doesn't do what we said it would, or what you asked for and can't be easily fixed

Alternatively, you can choose to keep the item and we will compensate you for any drop in value.

  • If the problem is not major, we will repair the item within a reasonable time.
  • If the item is not repaired in a reasonable time, you can choose a refund or replacement.

Please keep your proof of purchase such as your receipt.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

More from All New Parts
Mitsubishi Evolution 5 6 CP9A Floor Mats RHD for JDM & ADM Models
Mitsubishi Evolution 5 6 CP9A Floor Mats RHD for JDM & ADM Models
Mitsubishi Evolution 5 6 CP9A Floor Mats RHD for JDM & ADM Models
$330.00
Mitsubishi Evolution 7 8 9 MR CT9A Floor Mats RHD for JDM & ADM Models
Mitsubishi Evolution 7 8 9 MR CT9A Floor Mats RHD for JDM & ADM Models
Mitsubishi Evolution 7 8 9 MR CT9A Floor Mats RHD for JDM & ADM Models
$330.00
Sold Out
Mitsubishi Evolution 8 to Evolution 9 Headlight Patch Harness (Pair)
Mitsubishi Evolution 8 to Evolution 9 Headlight Patch Harness (Pair)
Mitsubishi Evolution 8 to Evolution 9 Headlight Patch Harness (Pair)
$155.00
Sold Out
Mitsubishi OEM Evo 7 8 9 Drip Moulding RHS Driver (MR520288)
Mitsubishi OEM Evo 7 8 9 Drip Moulding RHS Driver (MR520288)
Mitsubishi OEM Evo 7 8 9 Drip Moulding RHS Driver (MR520288)
$440.00
Mitsubishi OEM Weather Wind Visor Deflectors to suit Evo 7 8 9 CT9A (MZ562845EX)
Mitsubishi OEM Weather Wind Visor Deflectors to suit Evo 7 8 9 CT9A (MZ562845EX)
Mitsubishi OEM Weather Shield Wind Visor Deflectors to suit Evo 7 8 9 CT9A (MZ562845EX)
$220.00
Sold Out
Mitsubishi OEM Evo 7 8 9 Drip Moulding LHS Passenger (MR520287)
Mitsubishi OEM Evo 7 8 9 Drip Moulding LHS Passenger (MR520287)
Mitsubishi OEM Evo 7 8 9 Drip Moulding LHS Passenger (MR520287)
$440.00
Recently viewed