Mitsubishi Evolution X TMR Bathurst Edition 2011

SKU:

Mitsubishi Evolution X TMR Bathurst Edition 2011

SKU:
Regular price $78,000.00
/
Shipping calculated at checkout.
Mitsubishi Evolution X TMR Bathurst Edition 2011
(5sp Manual Rare)

Build no 40/100
● Low kms on chassis 86,000
● Log books and full service history
● Factory leather/suede heated Recaro seats
● ADM Factory 5sp Manual edition rare

TMR-tuned limited edition Lancer Evolution X made a debut at Bathurst.
Team Mitsubishi Ralliart TMR released a limited run of uprated Evo models, known as the Bathurst Edition.
Just 100 of the Bathurst Edition Evolutions X were built by respected TMR in Australia.
This Evo 10 isn’t just another build, it’s something special. It’s been put together to handle everything: street cruising, track days, roll racing, and drag – all with the perfect mix of power, reliability, and comfort. It’s also super practical for daily driving if you want, thanks to the quality parts used throughout from well-known brands and built by trusted workshops. No corners were cut.

● Modifications & Extras
- Motec M800 PnP Ecu with nock control, Wideband and map protection
- Tuned by Phil Armour at Armour Motorsport on e85
- Low Boost: 28PSI – 370KW
- High Boost: 32PSI – 416KW

● Engine specs/Power
- 4B11 Stroked to 2.2L
Bottom end Built by Chris Abe & Fresh Built head setup done in-house at ERS (Engine is rated 800hp 600kw safe)
- Nitto 2.2L Stroker kit
- GSC +1MM Oversized Values
- GSC Stem Seals
- GSC Valve Stems
- GSC S2 Cams
- GSC Springs & Retainers
- ACL Race Bearings
- ARP Main Studs
- ARP 625 Headstuds
- Athena Cut Ring Head Gasket
- All new gaskets, timing, seals etc been done and freshly assembled in-house at ERS

● Turbo setup / Fab
- BorgWarner EFR 8374 External gate T4 rear
- Hypertune Exhaust manifold T4 twin ceramic coated black
- Hypertune Billet Intercooler
- Hypertune Custom Intercoolers pipes w/wiggins clamps threwout
- Hypertune Custom stainless 3.5" Exhaust from Turbo Back
- Turbosmart wasegates x2
- 4inch Custom intake pipe with billet clamps
- Gruppe M Carbon Intake box
- Custom catchcan under plenum with lines to cover

● Fuel System
- Radium Multi Pump Surge Tank (Mounted inside boot)
- Walbro Intank Fuel pump feeding Surge setup
- Radium Fuel filter kit
- Radium Fuel rail with fuel pressure regulator and damper
- Radium & Custom Braided Fuel lines feed and return to suit
- ID1700 Injectors

● Driveline
- OS Giken Triple Plate Clutch
- Magnus Upgraded Clutch Master Cylinder
- Torque Solutions (Shifter base, Short shifter, Shifter linkages)

● Wheels/Suspension
- Volk Racing CE28 SL Rims 18x10.5+15 with Yokohama A052 Tyres 265/35/18
- Ohlins R&T Coil Overs
- Cusco Front & Rear Sway Bars
- Whiteline Roll Centre Kit

● Exterior / Interior / extras:
- 10MR HID Factory Headlights
- Factory Aluminium hand brake lever option
- Ralliart Stainless rear exhaust heat shields
- Carbon Ralliart style Front lip
- Carbon side skirt extensions
- Factory rear bar pods
- Android Head Unit
- Carbon dipped steering trim
- Carbon rad air guide panel
- Ralliart Coil cover
- Mitsubishi Factory slim weathersheilds
- Freshly detailed and polished
- AC works nice and cool
- Freshly Serviced front to back with all new Nulon Race Oils in-house at ERS ready for the new owner to just jump in and drive 👍

Alot of $$ has been spent on this car

The vehicle is located at ERS Evolution Racing Spares for inspections we can also help with Interstate buyers on transport Australia wide

NSW Registration is also available no problems depending on buyers request
Mitsubishi Evolution X TMR Bathurst Edition 2011
(5sp Manual Rare)

Build no 40/100
● Low kms on chassis 86,000
● Log books and full service history
● Factory leather/suede heated Recaro seats
● ADM Factory 5sp Manual edition rare

TMR-tuned limited edition Lancer Evolution X made a debut at Bathurst.
Team Mitsubishi Ralliart TMR released a limited run of uprated Evo models, known as the Bathurst Edition.
Just 100 of the Bathurst Edition Evolutions X were built by respected TMR in Australia.
This Evo 10 isn’t just another build, it’s something special. It’s been put together to handle everything: street cruising, track days, roll racing, and drag – all with the perfect mix of power, reliability, and comfort. It’s also super practical for daily driving if you want, thanks to the quality parts used throughout from well-known brands and built by trusted workshops. No corners were cut.

● Modifications & Extras
- Motec M800 PnP Ecu with nock control, Wideband and map protection
- Tuned by Phil Armour at Armour Motorsport on e85
- Low Boost: 28PSI – 370KW
- High Boost: 32PSI – 416KW

● Engine specs/Power
- 4B11 Stroked to 2.2L
Bottom end Built by Chris Abe & Fresh Built head setup done in-house at ERS (Engine is rated 800hp 600kw safe)
- Nitto 2.2L Stroker kit
- GSC +1MM Oversized Values
- GSC Stem Seals
- GSC Valve Stems
- GSC S2 Cams
- GSC Springs & Retainers
- ACL Race Bearings
- ARP Main Studs
- ARP 625 Headstuds
- Athena Cut Ring Head Gasket
- All new gaskets, timing, seals etc been done and freshly assembled in-house at ERS

● Turbo setup / Fab
- BorgWarner EFR 8374 External gate T4 rear
- Hypertune Exhaust manifold T4 twin ceramic coated black
- Hypertune Billet Intercooler
- Hypertune Custom Intercoolers pipes w/wiggins clamps threwout
- Hypertune Custom stainless 3.5" Exhaust from Turbo Back
- Turbosmart wasegates x2
- 4inch Custom intake pipe with billet clamps
- Gruppe M Carbon Intake box
- Custom catchcan under plenum with lines to cover

● Fuel System
- Radium Multi Pump Surge Tank (Mounted inside boot)
- Walbro Intank Fuel pump feeding Surge setup
- Radium Fuel filter kit
- Radium Fuel rail with fuel pressure regulator and damper
- Radium & Custom Braided Fuel lines feed and return to suit
- ID1700 Injectors

● Driveline
- OS Giken Triple Plate Clutch
- Magnus Upgraded Clutch Master Cylinder
- Torque Solutions (Shifter base, Short shifter, Shifter linkages)

● Wheels/Suspension
- Volk Racing CE28 SL Rims 18x10.5+15 with Yokohama A052 Tyres 265/35/18
- Ohlins R&T Coil Overs
- Cusco Front & Rear Sway Bars
- Whiteline Roll Centre Kit

● Exterior / Interior / extras:
- 10MR HID Factory Headlights
- Factory Aluminium hand brake lever option
- Ralliart Stainless rear exhaust heat shields
- Carbon Ralliart style Front lip
- Carbon side skirt extensions
- Factory rear bar pods
- Android Head Unit
- Carbon dipped steering trim
- Carbon rad air guide panel
- Ralliart Coil cover
- Mitsubishi Factory slim weathersheilds
- Freshly detailed and polished
- AC works nice and cool
- Freshly Serviced front to back with all new Nulon Race Oils in-house at ERS ready for the new owner to just jump in and drive 👍

Alot of $$ has been spent on this car

The vehicle is located at ERS Evolution Racing Spares for inspections we can also help with Interstate buyers on transport Australia wide

NSW Registration is also available no problems depending on buyers request

Evolution Racing Spares aims to have fast turnaround time for processing and handling orders, and will always make every effort to get the order to you as soon as possible.

Small items: 1-3 Days via Express Post Satchel
Medium Sized Items: 2-3 working days via AusPost Express or Courier (Depending on location)

Large Items: 2-8 working days (Large items can only be sent via courier, and delivery time depends on both courier and location

- Delivery to rural or remote areas, NT, WA, and TAS may take longer.

- Express Post shipping is only valid to areas that fall within the express post zone and is not guaranteed.

- Evolution Racing Spares may use the quickest carrier/method for delivery regardless of the method chosen at checkout.

- Typical handling time for items that are in stock is approximately 24-48 hours, with delays during holiday periods and public holidays.

- Evolution Racing Spares is not responsible for lost or damaged orders when customers change the delivery instructions to "authority to leave."

All goods sold and work performed by Evolution Racing Spares come with a 3-month warranty with no questions asked.

In accordance with the Australian Consumer Law, we are not required to provide a refund or replacement if you change your mind.

You can choose a refund or exchange if an item has a major problem, including:

  • A problem that would have stopped you from buying the item if you had known about it
  • The item is unsafe
  • The item is significantly different from the sample or description
  • The item doesn't do what we said it would, or what you asked for and can't be easily fixed

Alternatively, you can choose to keep the item and we will compensate you for any drop in value.

  • If the problem is not major, we will repair the item within a reasonable time.
  • If the item is not repaired in a reasonable time, you can choose a refund or replacement.

Please keep your proof of purchase such as your receipt.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

More from Latest Updates
Modal M1 Motorsport Coilover Suspension Kit for Mitsubishi Evo 7-9
$4,990.00
ILR "No Money" Lockout Shifter for 5 Speed Evo X
$1,980.00
ILR "No Money" Lockout Shifter for 5 Speed Evo 4-9
$1,980.00
EXEDY Single Plate Clutch Kit HD Heavy Duty for Mitsubishi Evo 4-9
$869.00
EXEDY Twin Plate Clutch Kit SD for Mitsubishi Evo 4-9 (Cerametallic)
$2,950.00
ERS / Highspeed Engineering Mitsubishi 4G63 Billet Oil Pump
$3,350.00
Recently viewed