Radium - Nissan Top Feed Fuel Rail Injector Conversion Seats

SKU: 20-0160-04

Radium - Nissan Top Feed Fuel Rail Injector Conversion Seats

SKU: 20-0160-04
Injector Seats
Regular price $76.00
/
  • In stock, ready to ship
  • Inventory on the way

Click here to download installation instructions (PDF)


These are the same machined aluminum injector seats used in Radium fuel rail kits. They are required when converting an OEM side feed injector to a top feed injector that uses a 14mm lower O-ring. They simply "pop" into the intake manifold (1 required per injector). They seal to the machined injector counterbore using the included FKM O-ring. The 2 sizes are based on the intake manifold's inside diameter of each injector counterbore. Below are just a few examples of some popular Nissan engines.

30mm = KA24DE S13/S14 SR20DET S13
25mm = RB25DET SR20DET S14/S15 SR20VE FWD 

All 30mm injector seats are black anodized. All 25mm injector seats (shown below) are Radium green anodized.

The injector seats are CNC machined with a common 14mm bore for the lower injector O-ring.


FEATURES

-CNC machined 6061 aluminum
-Bright dipped anodized
-Laser etched logo
-FKM O-rings 


INSTALLATION

Thoroughly clean out any dirt or debris found in the intake manifold injector seat bores. Next lubricate the Radium injector seat O-rings with engine oil. Press the Radium injector seats down firmly into the intake manifold injector ports until fully seated. If necessary use a small rubber mallet. 

"

Small items: 1-3 Days via Express Post Satchel

Medium Sized Items: 2-3 working days via AusPost Express or Courier (Depending on location)

Large Items: 2-8 working days (Large items can only be sent via courier, and delivery time depends on both courier and location

*Delivery to rural or remote areas, NT, WA, and TAS may take longer*

Click here to download installation instructions (PDF)


These are the same machined aluminum injector seats used in Radium fuel rail kits. They are required when converting an OEM side feed injector to a top feed injector that uses a 14mm lower O-ring. They simply "pop" into the intake manifold (1 required per injector). They seal to the machined injector counterbore using the included FKM O-ring. The 2 sizes are based on the intake manifold's inside diameter of each injector counterbore. Below are just a few examples of some popular Nissan engines.

30mm = KA24DE S13/S14 SR20DET S13
25mm = RB25DET SR20DET S14/S15 SR20VE FWD 

All 30mm injector seats are black anodized. All 25mm injector seats (shown below) are Radium green anodized.

The injector seats are CNC machined with a common 14mm bore for the lower injector O-ring.


FEATURES

-CNC machined 6061 aluminum
-Bright dipped anodized
-Laser etched logo
-FKM O-rings 


INSTALLATION

Thoroughly clean out any dirt or debris found in the intake manifold injector seat bores. Next lubricate the Radium injector seat O-rings with engine oil. Press the Radium injector seats down firmly into the intake manifold injector ports until fully seated. If necessary use a small rubber mallet. 

"

Evolution Racing Spares aims to have fast turnaround time for processing and handling orders, and will always make every effort to get the order to you as soon as possible.

Small items: 1-3 Days via Express Post Satchel
Medium Sized Items: 2-3 working days via AusPost Express or Courier (Depending on location)

Large Items: 2-8 working days (Large items can only be sent via courier, and delivery time depends on both courier and location

- Delivery to rural or remote areas, NT, WA, and TAS may take longer.

- Express Post shipping is only valid to areas that fall within the express post zone and is not guaranteed.

- Evolution Racing Spares may use the quickest carrier/method for delivery regardless of the method chosen at checkout.

- Typical handling time for items that are in stock is approximately 24-48 hours, with delays during holiday periods and public holidays.

- Evolution Racing Spares is not responsible for lost or damaged orders when customers change the delivery instructions to "authority to leave."

All goods sold and work performed by Evolution Racing Spares come with a 3-month warranty with no questions asked.

In accordance with the Australian Consumer Law, we are not required to provide a refund or replacement if you change your mind.

You can choose a refund or exchange if an item has a major problem, including:

  • A problem that would have stopped you from buying the item if you had known about it
  • The item is unsafe
  • The item is significantly different from the sample or description
  • The item doesn't do what we said it would, or what you asked for and can't be easily fixed

Alternatively, you can choose to keep the item and we will compensate you for any drop in value.

  • If the problem is not major, we will repair the item within a reasonable time.
  • If the item is not repaired in a reasonable time, you can choose a refund or replacement.

Please keep your proof of purchase such as your receipt.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

More from All New Parts
Mitsubishi Evolution 5 6 CP9A Floor Mats RHD for JDM & ADM Models
Mitsubishi Evolution 5 6 CP9A Floor Mats RHD for JDM & ADM Models
Mitsubishi Evolution 5 6 CP9A Floor Mats RHD for JDM & ADM Models
$221.00
Mitsubishi Evolution 7 8 9 MR CT9A Floor Mats RHD for JDM & ADM Models
Mitsubishi Evolution 7 8 9 MR CT9A Floor Mats RHD for JDM & ADM Models
Mitsubishi Evolution 7 8 9 MR CT9A Floor Mats RHD for JDM & ADM Models
$221.00
Sold Out
Mitsubishi Evo 7 - 9 Aftermarket IACV Idle Air Control Motor Valve (1450A069)
$100.00
Mitsubishi OEM Evo 7 8 9 Drip Moulding RHS Driver (MR520288)
Mitsubishi OEM Evo 7 8 9 Drip Moulding RHS Driver (MR520288)
Mitsubishi OEM Evo 7 8 9 Drip Moulding RHS Driver (MR520288)
$295.00
Sold Out
Mitsubishi Evolution 8 to Evolution 9 Headlight Patch Harness (Pair)
Mitsubishi Evolution 8 to Evolution 9 Headlight Patch Harness (Pair)
Mitsubishi Evolution 8 to Evolution 9 Headlight Patch Harness (Pair)
$104.00
Mitsubishi Evo 7 8 9 CT9A Interior Door Pull Pocket Screw Cap (MR655240)
$5.00
Recently viewed