Radium - Bulkhead Fuel Pump Harnesses and Connectors

SKU: 17-0001
Radium - Bulkhead Fuel Pump Harnesses and Connectors

Radium - Bulkhead Fuel Pump Harnesses and Connectors

SKU: 17-0001
Internal Bulkhead
External Bulkhead
Regular price $114.00
/
  • In stock, ready to ship
  • Inventory on the way
NOTE: Some of these wiring harness connectors are used in Radium Engineering products. For a complete bulkhead mating connection select one internal and one external harness from the lists above.

INTERNAL AND EXTERNAL BULKHEADS
External harness wires use 24" long 10AWG TXL insulated wires. Internal harness use twin 16 AWG ETFE insulated wires. 

4-Pin metal shell bulkheads and flying lead connectors are available and can be referenced by the part numbers shown in the photo below.

7-Pin Plastic shell bulkhead connectors (shown below) are no longer used in Radium products but limited quantities of 17-0027 and 17-0028 service parts are still available.
NOTE: If using Walbro "450" style pumps purchase 17-0028 and cut off the blade terminals then install a compatible mating plug for the Walbro 450 connector. Radium does not have these plugs available they will bave to be sourced HERE.
Alternatively after cutting off the blade terminals the wires can be soldered directly to the wires from the Walbro pump after cutting off the connector of the walbro pump.


Radium no longer carries the mating flying-lead or connector kit for these 7-pin bulkheads. Refer to the CONXALL part number below for the connector kit.


EXTERNAL ELECTRICAL BULKHEAD CONNECTORS
These bulkheads can be used for rebuilding a damaged connector or for DIY installation.

Metal shell 4-way connector shown above.

Radium no longer carries the external 7-pin mating connector or flying lead harness assembly found on legacy Radium products. However the connector kit shown in the photo below is still available from electrical component retailers on the internet. Google search using the part number in the photo.


PANEL REQUIREMENTS
All panels must be 0.06-0.18 inches thick. See the drawing below for cutouts for each bulkhead connector. A gasket is included on the large connector and the small connector includes an O-ring for sealing against panel surface.

 


PINOUTS
If wiring a connector to a Radium Engineering internal harness the pinouts are below.

"

Small items: 1-3 Days via Express Post Satchel

Medium Sized Items: 2-3 working days via AusPost Express or Courier (Depending on location)

Large Items: 2-8 working days (Large items can only be sent via courier, and delivery time depends on both courier and location

*Delivery to rural or remote areas, NT, WA, and TAS may take longer*

NOTE: Some of these wiring harness connectors are used in Radium Engineering products. For a complete bulkhead mating connection select one internal and one external harness from the lists above.

INTERNAL AND EXTERNAL BULKHEADS
External harness wires use 24" long 10AWG TXL insulated wires. Internal harness use twin 16 AWG ETFE insulated wires. 

4-Pin metal shell bulkheads and flying lead connectors are available and can be referenced by the part numbers shown in the photo below.

7-Pin Plastic shell bulkhead connectors (shown below) are no longer used in Radium products but limited quantities of 17-0027 and 17-0028 service parts are still available.
NOTE: If using Walbro "450" style pumps purchase 17-0028 and cut off the blade terminals then install a compatible mating plug for the Walbro 450 connector. Radium does not have these plugs available they will bave to be sourced HERE.
Alternatively after cutting off the blade terminals the wires can be soldered directly to the wires from the Walbro pump after cutting off the connector of the walbro pump.


Radium no longer carries the mating flying-lead or connector kit for these 7-pin bulkheads. Refer to the CONXALL part number below for the connector kit.


EXTERNAL ELECTRICAL BULKHEAD CONNECTORS
These bulkheads can be used for rebuilding a damaged connector or for DIY installation.

Metal shell 4-way connector shown above.

Radium no longer carries the external 7-pin mating connector or flying lead harness assembly found on legacy Radium products. However the connector kit shown in the photo below is still available from electrical component retailers on the internet. Google search using the part number in the photo.


PANEL REQUIREMENTS
All panels must be 0.06-0.18 inches thick. See the drawing below for cutouts for each bulkhead connector. A gasket is included on the large connector and the small connector includes an O-ring for sealing against panel surface.

 


PINOUTS
If wiring a connector to a Radium Engineering internal harness the pinouts are below.

"

Evolution Racing Spares aims to have fast turnaround time for processing and handling orders, and will always make every effort to get the order to you as soon as possible.

Small items: 1-3 Days via Express Post Satchel
Medium Sized Items: 2-3 working days via AusPost Express or Courier (Depending on location)

Large Items: 2-8 working days (Large items can only be sent via courier, and delivery time depends on both courier and location

- Delivery to rural or remote areas, NT, WA, and TAS may take longer.

- Express Post shipping is only valid to areas that fall within the express post zone and is not guaranteed.

- Evolution Racing Spares may use the quickest carrier/method for delivery regardless of the method chosen at checkout.

- Typical handling time for items that are in stock is approximately 24-48 hours, with delays during holiday periods and public holidays.

- Evolution Racing Spares is not responsible for lost or damaged orders when customers change the delivery instructions to "authority to leave."

All goods sold and work performed by Evolution Racing Spares come with a 3-month warranty with no questions asked.

In accordance with the Australian Consumer Law, we are not required to provide a refund or replacement if you change your mind.

You can choose a refund or exchange if an item has a major problem, including:

  • A problem that would have stopped you from buying the item if you had known about it
  • The item is unsafe
  • The item is significantly different from the sample or description
  • The item doesn't do what we said it would, or what you asked for and can't be easily fixed

Alternatively, you can choose to keep the item and we will compensate you for any drop in value.

  • If the problem is not major, we will repair the item within a reasonable time.
  • If the item is not repaired in a reasonable time, you can choose a refund or replacement.

Please keep your proof of purchase such as your receipt.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

More from All New Parts
Mitsubishi Evolution 5 6 CP9A Floor Mats RHD for JDM & ADM Models
Mitsubishi Evolution 5 6 CP9A Floor Mats RHD for JDM & ADM Models
Mitsubishi Evolution 5 6 CP9A Floor Mats RHD for JDM & ADM Models
$221.00
Mitsubishi Evolution 7 8 9 MR CT9A Floor Mats RHD for JDM & ADM Models
Mitsubishi Evolution 7 8 9 MR CT9A Floor Mats RHD for JDM & ADM Models
Mitsubishi Evolution 7 8 9 MR CT9A Floor Mats RHD for JDM & ADM Models
$221.00
Sold Out
Mitsubishi Evo 7 - 9 Aftermarket IACV Idle Air Control Motor Valve (1450A069)
$100.00
Mitsubishi OEM Evo 7 8 9 Drip Moulding RHS Driver (MR520288)
Mitsubishi OEM Evo 7 8 9 Drip Moulding RHS Driver (MR520288)
Mitsubishi OEM Evo 7 8 9 Drip Moulding RHS Driver (MR520288)
$295.00
Sold Out
Mitsubishi Evolution 8 to Evolution 9 Headlight Patch Harness (Pair)
Mitsubishi Evolution 8 to Evolution 9 Headlight Patch Harness (Pair)
Mitsubishi Evolution 8 to Evolution 9 Headlight Patch Harness (Pair)
$104.00
Mitsubishi Evo 7 8 9 CT9A Interior Door Pull Pocket Screw Cap (MR655240)
$5.00
Recently viewed